jokl

Diese Seite ist nicht editierbar. Sie können den Quelltext sehen, jedoch nicht verändern. Kontaktieren Sie den Administrator, wenn Sie glauben, dass hier ein Fehler vorliegt.

====== Eaton 5p 850i ======

===== Batterietausch zurücksetzen =====
  - Ensure the UPS is plugged in and powered with the batteries connected, but that the UPS output is off (it will be in a shutdown state with no power to the load)
  - Make note of any settings you changed/configured in the UPS
  - Navigate to Control > Restore Factory Setting, then click "Yes" if it asks, "Are you Sure?"
  - Once the factory reset is performed, unplug the UPS and wait until the display goes completely dark and the fans turn off.
  - Plug the UPS back in to the wall/source, configure any appropriate settings, then power on the UPS.
  - Wait approx. 1 minute, then verify the alarm is no longer active/no red LED and no alarms on the web card.
  - If you have a network card, under "UPS Status," hover your mouse over the battery symbol. The info box to the side should show a date of "49 months" or similar for the "Life Time" to further verify the LCM reset has taken place.

jokl

Benutzer-Werkzeuge

Webseiten-Werkzeuge

Seiten-Werkzeuge